Ram Sita Wooden Key Holder

Bring the blessings of Ram Sita Ji into your home every time you reach for your keys. This handcrafted wall-mounted key holder from Jaipur is carved from solid mango wood, finished with a walnut-tone polish, and adorned with an arched temple-window inlay featuring a vibrant hand-painted Ram Sita Ji portrait. Brass-plated hooks and decorative bells complete the devotional aesthetic — functional art that transforms your entryway into a sacred welcome.

Specifications

Mounting Instructions

1. Choose a flat wall surface at a comfortable height — entryway, living room, or puja room work best.
2. Hold the key holder against the wall and mark the two mounting-hole positions with a pencil.
3. Drill two holes (5 mm diameter) at the marked points and insert wall plugs/anchors.
4. Drive two screws (not included; use standard 4 mm × 30 mm wood screws) into the anchors, leaving a small gap for the holder to hang.
5. Hang the key holder on the screws and gently press it flush against the wall.
6. Verify it is level, then tighten screws if needed.

Tip: On drywall, use drywall anchors; on concrete or brick, use masonry anchors. The item weighs 350 g so standard single-hole anchors rated for 1 kg+ are sufficient.

Care

Wipe with a soft dry cloth. Avoid prolonged moisture or direct sunlight to preserve the hand-painted finish and wood grain.